Convert sensor data
to web pages
using a Cloud Instrument™

Tag4M Products:

Tag4M WiFi tag

Description

Tag4M is small, low-power 802.11b/g tag for connecting sensors to the Internet.
Based on RFID technology, it incorporates a 2.4-GHz radio, RISC processor,
full TCP/IP stack, realtime clock, FTP, DHCP, DNS and web server.

Key features

  • Small size: 6.5 cm x 4.8 cm (2.55″ x 1.88″)
  • 2.4-GHz IEEE-802.11b/g WiFi transceiver
  • On board ceramic chip antenna and connector for ext antenna
  • 32-bit RISC processor
  • Onboard thermistor
  • Ultra-low power: 4 µA sleep, 50 mA Rx, 210 mA Tx (max)
  • Memory configuration: ROM 512 Kbytes (eCos OS, TCP/IP, LWIP, and Security) RAM 128 Kbytes (64 Kbytes available to user application) Non-volatile memory (NVM) 1,536 bytes (SPI) EEPROM 125Kbytes (“Save to Flash” data).
  • Low power
Length of sleep period Battery lifetime (CR123A cell)
1 sec 52 hours
10 sec 13 days
100 sec 4 months
500 sec 2 years

Measurement capabilities:

  • 1 analog-input channel, 14-bit, 0-10V
  • 3 analog-input channels 14-bit, [-200mV; +500mV]
  • 1 current-input channel 4-20mA
  • 4 DIO lines read/write
  • Onboard temperature sensor: thermistor 10K +/-1 ºC
  • 32-kHz realtime clock for wakeup and timestamping
  • Data buffer: 10,000 readings in RAM, 30 readings in NVM
  • Maximum sampling rate: single point read, 25 S/sec.

Ordering Information:

Part Number              Quantity              Description:

999001-01                     1pc                 Tag4M WiFi tag

Tag4M_WiFi_Tag_Datasheet

Tag4M_Getting_Started

Tag4M – Communication_Protocol

Tag4M – Tag Configuration via USB cable

Back to the top ↑

Tag4M Web Page Instrument

 

Description

The Tag4M Web Page Instrument product offering is a license to install and use our generic tag instrument as shown at http://demo.tag4m.com/

The Tag4M Web Page Instrument is a web page which reads digitized data from Tag4M WiFi tags, writes configuration commands to Tag4M WiFi tags, processes tag data using expertise that is incorporated in its processing engine, and displays the information for tag users to see from a browser. The Tag4M Web Page Instrument has three functional components, the Tag Server, Web Server and Web Page.

 

Key features

  • Plug-and-play Tag4M WiFi tags display
  • Page refresh interval user setting
  • Complete Tag4M tag functionality display
  • Individual tag measurement functionality selection
  • Individual tag Sleep time setting
  • Individual tag Receive time setting
  • Individual tag Calibration constants setting
  • Server IP setting
  • Access Point SSID setting
  • Access Point WEP and WAP/WAP2 setting
  • Admin database

Requirements

  • Requires a Linux Ubuntu 9.10 Server that can access the internet.
  • If the Server is behind a firewall it needs to allow incoming UDP port 50007 as this is used for tags to connect to the server.

Ordering Information:

Part Number              Quantity              Description:

999002-01                     1pc                 Tag4M Web Page Instrument

Tag4M_Web_Page_Instrument_Datasheet

Tag4M – Communication_Protocol

Tag Configuration via USB cable

Back to the top ↑

Cloud Instrument

The Cloud Instrument contains 1pc Tag4M WiFi Tag and 1 license Tag4M Web Page Instrument.

Note: First time tag users who are not committed to purchasing the software license in the evaluation stage, can simply purchase tags and use the Tag4M Web Page Instrument posted at http://demo.tag4m.com/

Ordering Information:

Part Number              Quantity              Description:

999003-01                     1pc                 Cloud Instrument

Back to the top ↑

      Widget Instrument

      Temp Widget Instrument

      Thermistor Widget
      A Widget Instrument is a small measurement application that can be installed and executed within a web page. The widget gets data from a Cloud Instrument and either displays the value as it is or it applies some processing on the data before display. The unique features of a Widget Instrument are small size and embedded in a web page, media site or iPhone/Android/Blackberry/etc. device user interface.
      The Widget Instrument product includes the Tag4M WiFi tag and the widget user files. You can create any widget using the template inside the tag measurement capabilities: 0-10V, 4-20mA, and AI0,1,2 lines.

        Ordering Information:

        Part Number Quantity Description:

        777003-01 1pc Widget Instrument
                 Back to the top ↑

                                                                                        

          Digital Sensor Frame

          The Digital Sensor Frame is a frame for Multi-Sensory Moving Art that is connnected to WiFi sensors. The Digital Sensor Frame product contains 1pc WiFi Tag and the frame related artist site files. The WiFi tag contains a temperature sensor, but the artist is free to connect a different sensor to the tag terminals and by that create his own sensor driven art.

           

          Ordering Information:
          Part Number              Quantity              Description

          777001-01                   1pc                  Digital Sensor Frame
                                                                                                                                         
          Back to the top ↑

          The Keezheekoni

          Keezheekoni is Ted Hayward’s Multi-Sensory Moving art master piece.

          Ordering Information:

          Part Number              Quantity              Description:

          777002-01                     1pc                 The Keezheekoni

          Back to the top ↑